Rack & Pinion Devices

Pedestrian Gate R&P Device

2650 Slope-Top Pedestrian Gate Device (Shown)

Pedestrian Gate Rack & Pinion Devices are used at Outside Gate Entrance or Outside Gate Sallyports when full control opening of the door is to be controlled by central control to open the door. The door opens at a rate of 36" in 6 seconds and can be reversed to close or open at any point during the cycle allowing the central control to have full control of its position. To close the door the central control needs to energize the device so that the door returns to the locked and secure position. The door can be manually opened with the Pilaster Key

Specifications:

Housing size: 12" x 8-1/4" x ((2x DOW) + 16-1/4")

Housing construction: 3/16" HR Galvanized sheet w/10ga HR Galvanized cover

Door widths available: 3'-0" to 4'-6" in 6" increments

Door heights available: 6'-8" to 8'-0" in 2" increments

Pilaster keyed: front, back or both sides

Backplate: is removable

Options Available:

Housing heights: 1'-2" and 1'-4" are available

Electric key switch: mounted on the Pilaster front, back or both sides

Intercom: mounting on the Pilaster front, back or both sides

End Users

State Correctional Facilities

County Jails

Federal Correctional Facilities

Border Patrol Stations

ICE Detainee Facilities

Airport Perimeter Fencing

Installation

Installlation Drawings: Engineered installation drawings are included for each area where the product is to be installed

Pre-Installation Proceedure: The mounting surface shall be secure and rigid. All areas where the closure angles are to be mounted need to be free of surface obstacals that would impair a tight secure installation

Installation Proceedure: Use only qualified Journeyman Installers for the installation proceedure. Layout and install the *** enter here ***. Clean and dress any exposed welds prior to paint touchup

Final Finish: It is the OWNERS responsiblity for the paint type, color and application