Detention Benches & Stools
Contour Benches
7470-096-1-X-M0 (Shown)
DDS Contour Benches are designed and manufactured to meet the requirements of County, State and Federal Building Codes. All benches are assembled using Domestic Steel, fully welded construction and Powdercoat primed for painting. These benches are also available in Stainless Steel construction. The concrete anchors for the wall and floor are supplied by the installing contractor.
Specifications:
Material: -M0 12ga HR Sheet with internal stiffeners every 24"
Endcap Material: -M0 12ga HR Sheet welded and finished smooth to contour
Mounting: 2 1/2" x 2 1/2" x 1/4" HR Angle entire length top & bottom
Finish: -X Powdercoat Primer/Gray
Options Available:
Stainless Steel: -M6 Contructed from 304-#4 (Brush Finish) - Up Charge
Finish Color: -S Powder Coated in Cardinal Standard Colors from Powder Color Brochure below - Up Charge
Sound Deadening: -1 1" high density styrofoam board gluded to inside surface of bench - Up Charge
Configuration: Standard sizes available [width]
7470-024 24" long |
7470-048 48" long |
7470-072 72" long |
7470-096 96" long |
7470-120 120" long |
Custom sizes are available just contact our Sales Department
Detention Benches
7550-096-X-M0 (Shown)
DDS Floor Mounted Detention Benches are designed and manufactured to meet the requirements of County, State and Federal Building Codes. All benches are assembled using Domestic Steel, fully welded construction and Powdercoat primed for painting. These benches are also available in Stainless Steel construction. The concrete anchors for the floor are supplied by the installing contractor.
Specifications:
Material: -M0 12ga HR Sheet with internal stiffeners every 24"
Endcap Material: -M0 12ga HR Sheet welded and finished smooth to contour
Mounting: 8" x 8" x 1/4" HR Plate
Finish: -X Powdercoat Primer/Gray
Options Available:
Stainless Steel: -M6 Contructed from 304-#4 (Brush Finish) - Up Charge
Finish Color: -S Powder Coated in Cardinal Standard Colors from Powder Color Brochure below - Up Charge
Configuration: Standard sizes available [width]
7550-024 24" long |
7550-048 48" long |
7550-072 72" long |
7550-096 96" long |
7550-120 120" long |
Custom sizes are available just contact our Sales Department
Detention Stools
7517-X-M0 (Shown)
DDS Floor Mounted Stools are designed and manufactured to meet the requirements of County, State and Federal Building Codes. All Stools are assembled using Domestic Steel, fully welded construction and Powdercoat primed for painting. These benches are also available in Stainless Steel construction. The concrete anchors for the floor are supplied by the installing contractor.
Specifications:
Material: -M0 12ga HR Sheet with internal stiffeners every 24"
Mounting: 8" x 8" x 1/4" HR Plate
Finish: -X Powdercoat Primer/Gray
Options Available:
Stainless Steel: -M6 Contructed from 304-#4 (Brush Finish) - Up Charge
Finish Color: -S Powder Coated in Cardinal Standard Colors from Powder Color Brochure below - Up Charge