DetentionGRADE™ Security Ceiling System

7900 Security Ceiling System

Description

7900 Security Ceiling System was designed for the high security areas in Federal, State and County Institutions.  The 7900 DetentionGRADE Ceiling System is the Architects answer to Increased Security, Noise Reduction and Style. The easy to install panels are designed so that the borders on the panels match the ledger angles and support tees. In cell applications these panels offer extreme resistance to kicking by the inmate in the upper bunk, in dayroom and corridor applications these panels offer better visibility and light reflection along with optional insulation and noise reduction. 7900 DetentionGRADE Ceiling System is used in minimum to maximum security areas to provide an architecturally attractive ceiling while protecting exposed mechanical equipment from inmate abuse.

Available Ceiling Systems

7900A Security Ceiling System is a perforated panel system that is screwed together for tight access environments. This system requires a minimum of 6" of clear access above the installation to allow for the fastening of the panels together.

7900B Security Ceiling System is a perforated panel system that has interlocking panels that requires less installation labor while providing a greater bearing load.  This system requires a minimum of 8"(for 12" panels), 14"(for 18" panels) and 20"(for 24" panels) of clear access above the installation to allow the panels to lock together.

7900C Security Ceiling System is a non-perforated panel, interlocking system that requires less installation labor while providing a greater bearing load.  This system requires a minimum of 8"(for 12" panels), 14"(for 18" panels) and 20"(for 24" panels) of clear access above the installation to allow the panels to lock together.

Specifications

Available in standard galvanealed finish or baked on powder coatings in available architectural colors.

16 ga. ready-to-paint jet coat panels

12 ga. ready-to-paint ledger angles and tee sections

Optional Features

-T 14 ga. ready-to-paint jet coat panels

-12 12" wide panel

-18 18" wide panel

-24 24" wide panel

-G G90 galvanized material in lieu of standard material

-PC Baked-on powder coat paint, specify architectural color Powder Color Brochure below

-NR Noise reduction insulation with 20ga galvanealed metal backing

Shipping weight: 4 - 6 lbs./sqft

7900 Specification Sheet
7930 Secuity Access Panel
7935 Security Access Panel
Powder Color Brochure