DDS Secure-bilt TM line is comprised of specialty products designed for securing
detention facilities from both internal and external aggression. These products are
manufactured for specific types of applications ranging from minimum to maximum security.
This picture shows
DDS 7750 Security Mesh System and
DDS 7800 Security Hollow Metal ...
DDS 7700
Security Rib Bar Systems
are used in medium to
maximum security areas where air flow, visual and audible communications are demanded. DDS 7700A Security Rib Bar System is
considered a maximum detention grade
product that is made from heat treatable steel and certified to ASTM 627 specifications.
DDS
7700B Security Rib Bar System is considered a medium detention grade product
that is made from mild steel. Normal placement of
these systems are at holding cells, cell fronts and corridor cut-off doors.
DDS 7750
Security Mesh Systems
are used in areas where
contained security is required but air flow, visual and audible communications are
demanded. Normal placement of DDS 7750A Security Mesh Systems is in maximum security
exercise yards, cell fronts and window screens. DDS 7750B Security Mesh System
is
used in minimum to medium security controlled exercise yards, stairwells, mezzanine
railings, visitation areas and window screens.
DDS 7800
Detention Hollow Metal
Systems are custom manufactured in our
plant to plans and specifications. The product line consists of detention door
frames, visitation booths & dividers, panel walls, interior glazed partitions and
exterior windows. DDS 7800 Detention Hollow Metal is available
in ready to paint steel, ready to paint galvanized steel or stainless steel polished to a #4 finish.
DDS 7900 Security Ceiling Systems are used in minimum to
medium security areas to provide an architecturally attractive ceiling while protecting
exposed mechanical equipment from inmate abuse. DDS 7900A Security Ceiling System
is a less expensive screw together system. DDS 7900B/C Security Ceiling System is an
interlocking grid system that requires less installation labor while providing a greater
bearing load.
They both are available in standard galvanized finish or baked on powder coatings in
standard architectural colors.
